Previous
Next
IOT Based Automation
AdvanceTech India Provides a Very Low Cost for an Automatic Weather Station, Soil Moisture Data Logger, Air Quality Monitoring, Cold Chamber, Rain Gauge, Electronics Weather Display Board. Our Company Gives Complete Solutions for Agriculture & Environmental.
IOT Based Water Quality System
- This is very good setup to understand and develop applications for water quality monitoring system •
- This setup will have lot nodes to measure various water quality sensors like PH, TDS, DO, in both online and offline system
- Application for lot Nodes Share data Directly to the Cloud through Wifi
- Highly useful requirements for IPH and water sources
- The application involves STP, ETP plants and water pollution monitoring
- Android mobile App Will also be provided to see the Real-time Values remotely • Whole system is reprogrammable and codes will be provided
IOT Based Smart Lighting System
- This is very good setup to understand and develop applications Related to switching lightning system.
- This setup will have lot nodes to measure light sensor, and control and dim the different electrical gadgets Like Fan, AC, Lights, etc.
- Application for IoT Nodes Share data Directly to the Cloud, thru wifi
- Temp/humidity/measurements can also be viewed using lot based monitors
- Android mobile App Will also be provided to see the Real-time Values remotely.
- Whole system is reprogrammable and codes will be provided
IOT Based Environmental Applications
- This is very good setup to understand and develop applications Related to Environmental requirements
- This setup will have lot nodes to measure air quality and weather parameters, like gases So2 No2 PM2.5, PM 10, Temp Humidity in real time as well as in lab environments
- Application for lot Nodes Share data Directly to the Cloud
- Weather temp/humidity / rain fall measurements can also be viewed using lot based weather stations
- Android mobile App Will also be provided to see the Real-time Values remotely.
- Whole system is reprogrammable and codes will be provided with setup.
IOT Based Agriculture Applications
- This is very good setup to understand and develop applications Related to agriculture requirements.
- This setup will have lot nodes to measure Agri parameters, like soil NPK, SOIL MOSITURE Soil temp, etc.
- IoT Nodes Share data Directly to the Cloud and actuate Relays remotely also for water pumps.
- Weather temp/humidity / rain fall measurements can also be viewed using jot based weather stations.
- One Tablet with Android mobile App Will also be provided to see the Real-time Values remotely.
- Whole system is reprogrammable and codes will be provided with setup.
Technical Specs
- Quad-core ARM Cortex-A53 (Armv8-A architecture)
- Up to 1.2GHz Clock speed
- Broadcom Video Core IV
- 1GB LPDDR2 (900 MHz)
- MicroSDHC slot for onboard storage
- ATmega328P
- Up to 16 MHz Clock speed
- DIGITAL I/O PINS 14 (of which 6 provide PWM output)
- INPUT VOLTAGE -7-12V
- DC CURRENT PER I/O PIN – 20 Ma
- ANALOG INPUT PINS-06
- ESP-8266 32-bit
- Up to 80 MHz Clock speed
- Digital I/O Pins – 11
- Operating Voltage- 3.3V
- UART/SPI/I2C -1 / 1 / 1
- USB Connector- Micro USB
Communication Interfaces
- 10/100 Ethernet
- 2.4GHz 802.11n wireless
- Bluetooth Classic
- Bluetooth Low Energy
On board Sensors, actuators & Communication Interface Device
- PIR Sensor
- Ultrasonic Sensor
- DHT11 Sensor
- Joystick Module
- ESP-01
- Bluetooth module
- Buzzer 5V
- 5V Relay
- SG-90 Servo Motor
- 5V Stepper Motor
- 4×4 Membrane Keypad RGB LED – Common Cathod
- 400 pin Breadboard HDMI to micro
- HDMI Cable
- HDMI to Micro adaptor
Ports
- UART
- SPI
- I2C
- 8 Analog I/O
- 31 GPIOs to interface external sensors
- 4 USB 2.0 port
- 3.5mm analog audio-video jack
- 6x5V Power supply
- 5×3.3V Power supply
- HDMI output
- Camera Serial Interface(CSI)
- Display Serial Interface(DSI)
External Sensors
- DC motor with Fan – small one
- RF Wireless Transceiver
- GPS Tracker Module Neo 6M
- Mini Pump
- IR Sensor
- Module Sound sensor
- Touch sensor
- Capacitive Touch Sensor
- Gas sensor – Detect LPG, Alcohol, Propane, methane, Digital output – 0V-5V MQ-2
- Light sensor
- Magnetic switch – reed switch module
External Sensors
- soil Moisture sensor
- 3 Axis Digital accelerometer /3axix Magnetic field sensor & shield for Arduino
- Turbidity sensor –
- PH sensor board – 0 – 14PH.
- Heart beat sensor – Pulse sensor
- Water flow sensor – 1〜30 L/min – YSF201
- Water level sensor –
- Digital and Analog Vibration Sensor – Sensitivity – Greater than or equal 0.2g,Omnidirectional
- Oxygen level sensor max 30100
- Blood pressure sensor RFID RC522
- small chip
- Weight sensor Driver for load cell 20A
- Current sensor Solenoid valve OLED 0.96inch yellow and blue color Hall Effect a44e
- Camera Module
- Finger Print 307
- Flame Sensor 4pin
Tools and Accessories
- General Purpose PCB (6×4 , 4×4 , 3×2)
- Resistor pack
- Capacitor pack Connector (M2M, M2F, F2F)
- LED pack (Red, Green,Blue)
- IC ( 555,741,7805,7408,7400,7432,74 02)
- Wire Striper
- Insulation Tape
- Screwdriver Set